BIOS Updates forum

Ok, need info on this board. I was able to decode the 1131 to be Elitegroup, but can't find a model number for the update. My exact problem is the system freezes while setting the bios settings (this is after a jumper reset, the system was previously not going into windows at all). If I load the defaults (using F2), the system will freeze at the windows load up screen. If I use F1 to go into setup - it freezes about 10 seconds in. I'm hoping a bios flash might help, any other ideas???

Open case, check top surface for a P4S5MG/GL+ marking or something similar. On the same screen where you got this string the model number should be displayed as well.