Page 1 of 1

7 identical MB's, unknown "brand" .. need help

Posted: Sat Jun 01, 2002 11:04 am
by smrman
I can send image of the following board , boards do not start, so i can get no BIOS string :-(

Intel 82439TX chip, SOCKET 7 bord
50/60/66/75/83 Mhz bus
1.5/ ... 5.5 multiplier
2.8/2.9/3.??/3.45 /3.52 volt jumper blok, 5 sets maal 2 pins
4 PCI
3 ISA
4 SIMM
2 DIMM
AT en ATX power
AT layout (DIN keyboard)
onb IDE 2x
onb USB connector 1x
onb PS2 connector
onb com1/2/LPT/flopp

ON THE BOARD in WHITE LETTERS : W-P55TX2 (between 2nd en 3rd PCI slot)
ON LABEL ISA SLOT : bar code sticker : SIREX 96014781-50
ON "BOTTOM SIDE" mobo sticker E10A
ON CORNER BOARD (near power) sticker REV 1.21 :evil:

Is NO EPOX board, more likely Winco, but no manual;s available

Posted: Sat Jun 01, 2002 11:32 am
by th
Sound like Epox
Get the manual from here:
http://www.epox.nl/english/support/manuals/socket7.htm

and compare.

bye
Thomas

Posted: Sat Jun 01, 2002 12:43 pm
by Rainbow
Looks more like infamous Winco...

Posted: Sat Jun 01, 2002 4:52 pm
by Rainbow
Really Winco W-P55TX2. BIOS is here http://web.archive.org/web/200006061127 ... ical_f.htm

Posted: Sat Jun 01, 2002 7:09 pm
by Rainbow
There were no manuals at Winco page...

Posted: Sun Jun 02, 2002 10:18 am
by edwin
smrman,
what kind of CPU are you trying to run in this board? We can give you the bus/multiplier/voltage settings for it and the advice to use two identical sticks of memory, maybe you can get the board to complete the POST and show a bios string.

Posted: Sun Jun 02, 2002 10:29 am
by edwin
Even the product page was incomplete, the only pic I found is B/W and about the size of a fingernail...