Help Identifying FlagPoint board and finding bios
Posted: Wed Mar 27, 2002 2:27 pm
I have a PII FlagPoint MotherBoard.
The only reference I can get from it is:
FlagPoint LX Lite
hence I don't have the manual
The Chip Set is Intel:
FW82371EB
L840IF43
SL374
It has 1 AGP, 4 PCI and 3 ISA SLots and 3 DIMM slots
This board was "attacked" by the chernobyl virus (2/3 years ago) that reprogrammed the BIOS.
Till now, all that I could do was flash (with the ecsflash program) the bios with a Bios from other board with the chipset 440LX (I don't still now if this is my board chipset) and make the board power on. I can access the bios, change the bios settings, but that bios does not even detect my Flopy drive (but it can talk with the AGP port once i can see everithing in the monitor). I've tried many ... many sites but everyone point to the flagpoint web site that is dead. All that I would like to know is
1- If "FlagPoint LX Lite" is the Motherboard model
2- Where can I can find the file to flash the bios with.
By the way, in the board is written that it accepts PII runing at 200, 233, 266, 300 and 333 MHz
Thank you Very Much
Paulo
The only reference I can get from it is:
FlagPoint LX Lite
hence I don't have the manual
The Chip Set is Intel:
FW82371EB
L840IF43
SL374
It has 1 AGP, 4 PCI and 3 ISA SLots and 3 DIMM slots
This board was "attacked" by the chernobyl virus (2/3 years ago) that reprogrammed the BIOS.
Till now, all that I could do was flash (with the ecsflash program) the bios with a Bios from other board with the chipset 440LX (I don't still now if this is my board chipset) and make the board power on. I can access the bios, change the bios settings, but that bios does not even detect my Flopy drive (but it can talk with the AGP port once i can see everithing in the monitor). I've tried many ... many sites but everyone point to the flagpoint web site that is dead. All that I would like to know is
1- If "FlagPoint LX Lite" is the Motherboard model
2- Where can I can find the file to flash the bios with.
By the way, in the board is written that it accepts PII runing at 200, 233, 266, 300 and 333 MHz
Thank you Very Much
Paulo
