Page 1 of 2
Unknown motherboard BIOS update
Posted: Wed Apr 19, 2006 6:35 pm
by kiza
I would like to update BIOS from the manufacturers web site but I don't know who it is!
BIOS Date: 12/28/00
BIOS Type: Award Modular BIOS v6.00PG
BIOS ID: 12/28/2000-i815E-ITE8870-AI815EPC
OEM Sign-On: M7-AI815EP Ver 2.0d 12/28/2000 2M
Chipset: Intel 1130 rev 2
Superio: ITE 8712F rev 3 found at port 2Eh
Any help will be appreciated!
Posted: Wed Apr 19, 2006 7:35 pm
by KURIAKI
It's a Jama M7-AI815EP.
There are no BIOS update for it.
Some Chinese vendors has the same model with other names.
Posted: Wed Apr 19, 2006 7:40 pm
by kiza
Spot on. It looks exactly the same. Many thanks!
Posted: Wed Apr 19, 2006 8:19 pm
by kiza
Is it possible to use some other Award BIOS to update?
Posted: Thu Apr 20, 2006 12:24 am
by Denniss
Is it possible this thing is a rebadged ECS board ?
http://www.supportbios.info/resultado.a ... &Idioma=EN
At least the 2MB version of P6ISM II and P6ISA-II have similar strings and version numbers.
Posted: Thu Apr 20, 2006 8:29 am
by KURIAKI
I think you're right.
What about a Matsonic MS7057C?
Posted: Fri Apr 21, 2006 5:43 pm
by kiza
So, would it be possible to flash with some other BIOS in order to upgrade CPU from 733 MHz to 1GHz?
Posted: Fri Apr 21, 2006 6:39 pm
by KURIAKI
Maybe, if you can afford the risk.
CPU support for ECS P6ISA-II:
http://www.ecs.com.tw/ECSWeb/Support/CP ... 48&LanID=0
Posted: Sat Apr 22, 2006 9:16 am
by edwin
that's the main search page, this is the detail for P6ISA-II
http://www.ecs.com.tw/ECSWeb/Support/CP ... 48&LanID=0
Posted: Sun Apr 23, 2006 2:52 pm
by kiza
Solution will be to have both old and new bios on disc. If the flashing with new BIOS does not work I should be able to return to original one. Right?
Posted: Sun Apr 23, 2006 10:47 pm
by edwin
yes
Posted: Tue Apr 25, 2006 3:42 pm
by kiza
The only problem is how to read original bios in order to have a copy. Any clues please?
Posted: Wed Apr 26, 2006 2:41 am
by ajzchips
If you'll be using AWDFLASH, use the /? switch to find out. UNIFLASH will save a copy too.
Posted: Sun Apr 30, 2006 2:32 pm
by kiza
Following your instruction I've managed to save the copy of the original Bios.
If you need it I can forward a copy to you. I am not sure which version of Bios for ECS P6ISA to use for flashing! Many thanks!
Posted: Sun Apr 30, 2006 2:52 pm
by KURIAKI
Can you send me a copy please?
