ECS RC410-M2 v1.0 mobo
Posted: Wed May 16, 2007 12:49 pm
Hi
Have an ECS RC410-M2 v1.0 motherboard. No case.
I believe it to be an OEM version, possibly Packard Bell.
1. I am aware, PB use this board in their PC product line
so far as they refer to using an ECS RC410 in the iStart PC from 2006;
2. But I cannot find any reference to an RC410 on the ECS website;
3. The ECS S/N is on the printer port connector and;
3. The board has a decal on the board with the following details;
M/B S/N - MBP220700153500535EL00
Is this a Packard Bell number?
Until such time as I can establish whether (not) PB are referring to the
RC410-M2, as the board is presently dead, I require to get the correct
BIOS first to test the mobo further.
Any help appreciated.
Thanks.
Have an ECS RC410-M2 v1.0 motherboard. No case.
I believe it to be an OEM version, possibly Packard Bell.
1. I am aware, PB use this board in their PC product line
so far as they refer to using an ECS RC410 in the iStart PC from 2006;
2. But I cannot find any reference to an RC410 on the ECS website;
3. The ECS S/N is on the printer port connector and;
3. The board has a decal on the board with the following details;
M/B S/N - MBP220700153500535EL00
Is this a Packard Bell number?
Until such time as I can establish whether (not) PB are referring to the
RC410-M2, as the board is presently dead, I require to get the correct
BIOS first to test the mobo further.
Any help appreciated.
Thanks.