BIOS Updates forum

Hi,

i have a Arista ARP-2610AP IPC with an special desingned mainboard based on a VIA C3 667 MHz one core processor with 512 MB SO-DIMM (SD)
It's not fast, but working...
Unfortunately the USB-plug from bracket lost the connection from board-header
I did try some positions and killed 2 USB sticks
Google didn't find any informations to this board (except the Arista page or resellers), Arista distribute the touchscreendriver and 2 old advertisingflyer only.
A emailrequest did rejected from server
One onboard USB-port isn't enough. ok, i can it expand with a hub, but trough a hub i can't boot from a stick
Can anybody give me a hint, where i can get a manual or a draw with the connetors, please?

Thank you,
Ger@ld

Today i'd found the right position for usb-bracked header
It's in front of LAN connector. LAN must be at 12 o'clock! Connector has 4 pin only, plug 5 pin. right side first black wire must be "on air". left side red wire on pin 4. For first test i'd use a modyfied usb-plug with an LED and a resistor between + and - . This pre-test save some hardware If te LED is working, next test is an usb-stick. And surprise, surprise, windows found it

I think about to change the mainboard. CPU works with snail-speed
I'd found, that this mainboard do have a TTL- output for LCD. After this output is a EPM-1520-24 TTL --> LVDS converter board. I found this manual: http://www.avalue.com.tw/download/Users ... th_QIG.pdf
"All" what i need, is a mainboard with TTL output and a ser. interface for the touch driver with smal footprint (mini-ITX or similar), but it looks like, that TTL output is very exotic