Page 1 of 1
TOTEM TM-P2VAP Manual
Posted: Fri Mar 14, 2003 10:57 am
by linux_power
I am in need of a manual for the Totem TM-P2VAP. I have tried the following website
http://www.elhvb.com/mboards/totem/manuals/ - but the manual once downloaded is corrupt.
If possible some someone email me it.
thanks in advance
Posted: Fri Mar 14, 2003 2:33 pm
by Rainbow
Tried using download manager such as GetRight?
Posted: Sun Mar 16, 2003 11:27 pm
by edwin
No use, my FTP proggie scr*wed up badly.
Many of them are incomplete. Correcting the P2VAP as I type, might take some time. Server is slow today...
Posted: Mon Mar 17, 2003 12:00 am
by edwin
smartftp 1.0.973 tells you it's done with uploading when it is not for some odd reason, you have to manually restart the upload session (up to 4 times !) to get it into its brains it is not done uploading yet...
Corrected and checked, they are OK now.
Posted: Tue Mar 18, 2003 2:08 am
by ajzchips
You might want to try LeechFTP. It'll never say "upload ok" if it isn't 100% sure (and there).
Posted: Tue Mar 18, 2003 8:01 am
by edwin
Another proggie. I would have 4 just for FTPing...
Posted: Tue Mar 18, 2003 3:29 pm
by Rainbow
When uploading through FTP gateway (such as WinProxy), the FTP client shows that the upload is complete but the data might not be completely uploaded. You need to wait for the directory to refresh (the FTP client will send LIST command but must wait until the server asks for it - the upload is really completed then).
Posted: Tue Mar 18, 2003 7:41 pm
by edwin
files no longer listed in the global queue and you tell me it is still uploading? I didn't see any activity on my modem anymore. I've waited two minutes or so...
