Page 1 of 1

need to find a manual for a SMT tx3 mother board

Posted: Tue Apr 08, 2003 2:27 am
by bike108
i need to find a manual for a smt tx3 motherboard. I am upgarding my processor from a 166mhz to a 200mhz and i need to know the jumper settings.

Posted: Tue Apr 08, 2003 11:20 am
by NickS
Is it this:
STM/Newtech P55TX3 ?
Image
http://web.archive.org/web/199807120758 ... p55tx3.htm?
A BIOS is at http://www.nix.ru/support/drivers.html? ... vendor=193
BIOS ID (bottom left): 03/05/98-i430TX-ALi5135-2A59ISE9C-00
BIOS message (top left): TX Pentium system BIOS Ver:TX3-5 3/5/1998

Right board

Posted: Wed Apr 09, 2003 2:16 am
by bike108
This is the right motherboard if u have any info let me know
NickS wrote:Is it this:
STM/Newtech P55TX3 ?
Image
http://web.archive.org/web/199807120758 ... p55tx3.htm?
A BIOS is at http://www.nix.ru/support/drivers.html? ... vendor=193
BIOS ID (bootom left): 03/05/98-i430TX-ALi5135-2A59ISE9C-00
BIOS message (top left): TX Pentium system BIOS Ver:TX3-5 3/5/1998

Posted: Fri Jun 27, 2003 10:50 pm
by sapucaia
Hi!

If its processor will not be none of these, accurately says the model that I pass jumper settings.


Intel 200MHZ Processor (66x3)

FS0 = 1-2
FS1 = 1-2
BF0 = 1-2
BF1 = 2-3
BF2 = X

Cyrix 6x86 / 6x86L P200 (75x2)

FS0 = 1-2
FS1 = 2-3
BF0 = 2-3
BF1 = 1-2
BF2 = 1-2

Cyrix 6x86MX(M2) P200 (66x2.5)

FS0 = 1-2
FS1 = 1-2
BF0 = 2-3
BF1 = 2-3
BF2 = 1-2

AMD K5 PR200 (60X3)

FS0 = 2-3
FS1 = 1-2
BF0 = 1-2
BF1 = 2-3
BF2 = X

AMD K6 200MHZ (66X3)

FS0 = 1-2
FS1 = 1-2
BF0 = 1-2
BF1 = 2-3
BF2 = 1-2

I need this manual

Posted: Tue Jul 17, 2007 6:03 am
by multitudo
Hi Sapucaia, i need the manual this motherboard. I have a k6 233 e a pentium 233. I need (66X3.5), (66X4), (66X4.5), (66X5) and (66X5.5) jumper settings. if possible? Thanks.

Posted: Fri Nov 02, 2007 12:29 pm
by edwin
will not do more than 3.0x with any settings.

Posted: Fri Nov 02, 2007 1:55 pm
by KachiWachi
edwin wrote:will not do more than 3.0x with any settings.
You are referring to the Intel CPU here...correct?