Page 1 of 1
Manual for Compaq board
Posted: Tue Mar 02, 2004 3:32 pm
by Rolf
Hi,
I cannot find a manual for the board of a friend of mine. The board is from a
Compaq Deskpro EP/SB with a 350 MHz Pentium II. A Compaq tool identifies it as a 8915CCJ82038. Google has zero hits for that string and the Compaq/HP homepage is just a mess. Anybody know of a place where to get a manual? TIA.
Best
Rolf
Posted: Sat Mar 06, 2004 3:06 pm
by Toby B
From what I can turn up from the posted info. the board is codenamed GARRY.
Toby B. wrote:evasive wrote:Found a shred of paper with some notes:
Deskpro EP C266/2.1 NTL id 686T1
332857-001 008312-512 GARRY 13/7
s/n 8829BYN20xxx
2xSER/PAR/MS/KB/2xUSB
3ISA/3PCI/AGP Slot1
2xDIMM
ATX PWR
1xFDD
IDE
IDE
front panel
+o-+-xx+-
pwr led hdd led pwr sw scsi led
Proprietory as heck but we at least have some info and now a pic of this board for referrence:
gonna see if I can dig some more info up....
http://www.s87841630.onlinehome.us/mode ... garry.html
Will see about digging up a manual/tech. doc.
Posted: Sat Mar 06, 2004 3:10 pm
by Toby B
Posted: Sat Mar 06, 2004 3:55 pm
by Rainbow
Looks exactly like the dead board I have here (a topic about it is somewhere at this forum)...
Posted: Sat Mar 06, 2004 4:03 pm
by Toby B
yeah I remember that thread. At this time we have not managed to identify the board past a codename.
edit
heres Rainbow's thread:
http://www.wimsbios.com/phpBB2/viewtopi ... mpaq#21681
Posted: Sat Mar 06, 2004 5:25 pm
by Rainbow
Oh, it's not exactly the same board - different number of slots...
Posted: Sat Mar 06, 2004 7:56 pm
by Toby B
Rainbow wrote:Oh, it's not exactly the same board - different number of slots...
jumped the gun on that...
Posted: Mon Mar 08, 2004 1:04 am
by edwin
Posted: Mon Mar 08, 2004 2:05 am
by Toby B
hey I have to give credit where credit is due...
Since you were the one that originally provided me with that info..
Posted: Tue May 03, 2005 7:04 pm
by ChRoNoS_KenS
motherboard manual
Posted: Sun Oct 30, 2005 4:33 pm
by jkwim
I have the exact board shown in the above picture. There is a white connector behind and to the left of the serial ports with 3 pins sticking up. Is that a fan power connector ?
Re: motherboard manual
Posted: Tue Nov 08, 2005 12:41 am
by edwin
jkwim wrote:I have the exact board shown in the above picture. There is a white connector behind and to the left of the serial ports with 3 pins sticking up. Is that a fan power connector ?
you do NOT have the exact same board then as this one has NO three-pin connector there. It might be a fan connector but I wouldn't count on it, the original case design uses a PASSIVE cooling block on the CPU and a HUGE fan in the case blowing at the CPU...