NEED PINOUT SuperPower SP-586TX
Posted: Sun Sep 16, 2007 11:36 pm
I am replacing a dead Ocktek Rhino9 (stop recognizing floppy drive) with an SP-586TX. I am having a problem hooking up the PS/2 port.
The Rhino9 had a 4-pin connector with Red, Black, Orange, and Yellow wires on pins 1-4, respectively.
The SP-586TX has a 5-pin connector on the motherboard with a key on pin 2 (no pin).
I was hoping for some help on what the pinout was for this so that I can correctly rewire the 4-pin to work on the 5-pin
Thanks in advance!
The Rhino9 had a 4-pin connector with Red, Black, Orange, and Yellow wires on pins 1-4, respectively.
The SP-586TX has a 5-pin connector on the motherboard with a key on pin 2 (no pin).
I was hoping for some help on what the pinout was for this so that I can correctly rewire the 4-pin to work on the 5-pin
Thanks in advance!