Page 1 of 1

MS-6541 ver:2.1 (compaq ?)

Posted: Thu Nov 29, 2007 1:18 pm
by Atasas
Hello everybody,
I've got a mobo (as far as can understand from Compaq PC) and not a clue on jumper settings...
Would somebody could possibly help me with it please?
Idealy I would like the whole manual, but anything, that would help me to start it would be handy...
PS the mobo is made by Microstar and there I could'nt find the one that I've got.....[/img]http://img516.imageshack.us/my.php?image=moboun4.jpg [img]
or the compaq/HP where all is referenced through product series/ nr...
Many thanks!

Posted: Fri Dec 21, 2007 6:37 pm
by edwin
The Raptor board:
http://www.ctechinfo.org/boards/msi/raptor.html

Not much info on that I fear...

Posted: Sat Dec 22, 2007 4:57 pm
by Atasas
Thanks!

myself-I've bined the board already ( Had some other issues)
But start pins where 6 and 8; and I did find some awfull (unreadable, scatered) guides on Compaq/HP website :evil: under "evo 310" and everywhere else...
http://bizsupport.austin.hp.com/bc/docs ... bd2cae396a
http://h20000.www2.hp.com/bizsupport/Te ... esId=96284
Thanks once again