K6XV3+/66 jumpers doubts
Posted: Tue Sep 28, 2010 1:15 pm
Hi people!
I'm trying to use this motherboard, but I'm not sure how I have to configure the jumpers.
I'm using AMD K6 II 550MHz, 3 RAM modules of 128MBytes each one, and I can read in the manual that it's a PC133:
That's my current configuration, but the PC has a strange behaviour and it hangs or reboots trying to install windows or booting a linux live cd:
JP8: Jumper 1: OFF
2: OFF
3: OFF
4: OFF
5: OFF
6: ON
JP5: jumper 1 and 2 connected, jumper 3 alone
SW1: Jumper 1: OFF
2: OFF
3: OFF
4: ON
5: OFF
with this configuration about JP5 and SW1 I get 2.8V for the k6 II 550 MHz processor. Is it the correct voltage?
Jumper setting for SDRAM clock: Jumper 2-3 ON --> SDRAM CLK = CPU CLK
Jumper setting for clearing CMOS data: Jumper 2-3 ON --> Normal
CPU fan Connector: nothing connected there
AGP fan connector: CPU cooler plugged there ( the graphics card is PCI)
Is this configuration correct? If not, please, let me know.
Thanks in advance.
I'm trying to use this motherboard, but I'm not sure how I have to configure the jumpers.
I'm using AMD K6 II 550MHz, 3 RAM modules of 128MBytes each one, and I can read in the manual that it's a PC133:
That's my current configuration, but the PC has a strange behaviour and it hangs or reboots trying to install windows or booting a linux live cd:
JP8: Jumper 1: OFF
2: OFF
3: OFF
4: OFF
5: OFF
6: ON
JP5: jumper 1 and 2 connected, jumper 3 alone
SW1: Jumper 1: OFF
2: OFF
3: OFF
4: ON
5: OFF
with this configuration about JP5 and SW1 I get 2.8V for the k6 II 550 MHz processor. Is it the correct voltage?
Jumper setting for SDRAM clock: Jumper 2-3 ON --> SDRAM CLK = CPU CLK
Jumper setting for clearing CMOS data: Jumper 2-3 ON --> Normal
CPU fan Connector: nothing connected there
AGP fan connector: CPU cooler plugged there ( the graphics card is PCI)
Is this configuration correct? If not, please, let me know.
Thanks in advance.