Page 1 of 1
Gig.Mainboard
Posted: Thu Aug 07, 2003 11:25 am
by SteveC
Hi, this is my first post so I will try and be as informative as possible.I have an old Gigabyte Mainboard GA-71XEH, it's still going strong, but I want to replace my CD Rom with a CD/RW. I have Win 98SE.The Gigabyte website says Mainbord will support a CD Rom bootable, does this mean it will recognise a CD/RW drive.I have been into the BIOS and can't find a CD/RW mentioned only the CD Rom.Thanks in advance.
Posted: Fri Aug 08, 2003 11:29 pm
by edwin
Set for autodetect and you'll be fine.
Don't forget to install burning software if not running XP.
Posted: Sat Aug 09, 2003 9:23 am
by SteveC
Thanks edwin, I have the OS in the bios set for PnP detect, is this what you mean.Or is there another bios setting I need to adjust. Cheers Steve
Posted: Sat Aug 09, 2003 2:34 pm
by KachiWachi
First BIOS screen (STANDARD CMOS SETUP) where you set the time, etc...
Set the Master/Slave TYPE and MODE to AUTO/AUTO for all. To speed up the boot process though, you can turn off the ones you know you don't have devices on.
Some devices require the setting to be NONE per the manufacturer...like for an Internal ZIP drive. Set what the manufacturer recommends in the setup instructions.
