Page 1 of 1

help me please!

Posted: Thu Mar 30, 2006 4:29 am
by cuongnd79
I am trying to upgrade to my video to a GeForce2 MX400 PCI card but my system came with onboard graphics (82810E on GIGA-6WMMC7). My bios does not have an option to disable and I have tried to disable through Device Manager but all I keep getting everytime I restart or power on is a black screen (the led in the monitor is blinking).

Does anyone have any advice for me on how to disable this? Should I change the jumper settings? Unfortunetely I cannot locate my GIGA-6WMMC7 on ANY websites or FTP sites of GIGABITE.
Thanks
(i have a gif for anyone who help me to fix this problem) :D

Posted: Thu Mar 30, 2006 4:48 am
by Denniss
Enter Bios. There seach for an Optin like "Primary VGA" or "VGA Boot from" or something similar. Switch this Option from OnBoard /AGP to PCI and your new PCI VGA should become the primary VGA device.

http://www.gigabyte.com.tw/Products/Mot ... uctID=1447

Posted: Thu Mar 30, 2006 4:56 am
by cuongnd79
Denniss wrote:Enter Bios. There seach for an Optin like "Primary VGA" or "VGA Boot from" or something similar. Switch this Option from OnBoard /AGP to PCI and your new PCI VGA should become the primary VGA device.

http://www.gigabyte.com.tw/Products/Mot ... uctID=1447
Thanks Denniss
I tryed to do that (set PCI to the primary) but it not working properly. when i sutting down or restart, power on... i had a black screen :cry:
I can't disable the vga onboard (intel 82810E) :?
Help me again...

Posted: Thu Mar 30, 2006 3:08 pm
by KachiWachi

Thank you!

Posted: Fri Mar 31, 2006 3:27 am
by cuongnd79
Thank you!
I try to do that now
...

Posted: Sat Feb 14, 2009 10:57 pm
by InsomPsycho
The intel link is broken; I am having the same problem, and I found the option to boot from different video devices, but PCI-express is already selected. Why then, wouldn't it be booting from my video card? It shows a screen as though the monitor is not connected.

Posted: Sun Feb 15, 2009 2:38 pm
by KachiWachi