Page 1 of 1

Many questions for newbie

Posted: Mon Aug 08, 2011 12:06 pm
by WTK779
Hi all

My pc is based on mainboard PCChips M810LR, Chipset: SiS 730 rev 2, socket 462 Athlon 2200+

The bios is Amibios in in Plcc32 686 AMIBIOS® © 1999 AS23 1083 chip ATMEL AT49F002T_V3

I have a bios chip poorly written, I tried to update it but I had disabled the Usb ports, can not write
with utilities Aminfxxx

Perhaps bootblock does not allow the new writing on Plcc32

Recommended me the best utility for flashing the bios?

What kind of chips can replace PLCC32 Atmel AT49F002T_V3


Thanks in advance :D


Regards

Re: Many questions for newbie

Posted: Tue Aug 09, 2011 8:45 pm
by cp
The AT49F002T can be replaced by any other 256kB (2Mbit) 5V PLCC32 flash chip. just make sure to use Uniflash or Flashrom to program the chip. You can even hotswap it on another mainboard that supports 2Mbit chips.

Re: Many questions for newbie

Posted: Tue Aug 09, 2011 9:38 pm
by WTK779
Hi

The chip Plcc3 such, PMC PM39F020, or SST39SF020, or Winbond W49F002
working well?

Not found in ebay, you know where to buy? :-)

Thanks

Regards

Re: Many questions for newbie

Posted: Sun Aug 21, 2011 11:51 am
by cp
they all should work. look for 2M or 256kx8 PLCC32 5V chips. and make sure to use uniflash or flashrom to flash them. that's all.