Page 1 of 1
ADDING BIOS LOGO Problem
Posted: Thu Aug 15, 2002 4:42 am
by roy.reglan
Any can help me add a bios logo to my Tomato BX98 Motherboard i try using cbrom6 and it give me this error:
When i Try to run with this string.
CBROM6.EXE BX98.BIN /logo Logos.bmp
and gives me this message.
CBROM V6.03B (c) Award Software 1999. All Rights Reserved.
ADDING LOGOS.BMP 50.4%
BX98.BIN have not enough space for adding ROM. (Over 01C3h bytes)
When i Try to run with this string.
CBROM6.EXE BX98.BIN /logo
and gives me this message.
CBROM V6.03B (c) Award Software 1999. All Rights Reserved.
Not found i:\eprom\D4LOGO.BMP !!!
The logo size is 160 x 140 in 256 Colors.
Can anybody help with this problem of mine.
Posted: Thu Aug 15, 2002 10:08 am
by NickS
Can you post a link to the instructions you followed ?
Posted: Tue Aug 20, 2002 3:08 pm
by NickS
Did you release the existing epa logo file from the .BIN ?
Posted: Wed Aug 28, 2002 5:46 pm
by tomuf
you don't have enough free space in ROM - you must free some space; maybe freeing old logo will help you cbrom6 bios.bin /logo release; if it doesn't, you can try to release something else, but don't release anything you aren't 100% sure what does; for example, my A7V333 MB has optional RAID controller and BIOS is present even for A7V333 boards that don't have it - it takes about 30kb of ROM so it is good idea to release it when it isn't needed...
