BIOS Updates forum

I got to your site thru Via Hardware,lots of cool info here. Heres my prob, I want to flash the bios on this M767 board that my neighbor dropped off. I have installed a slotket 3 and a celeron 600 flipchip. I would like to install a 850 P III but the board won't even boot hen installed. Question, which AMI bios flash utility should I use for this board. I assume the correct bios is 990301s. At bootup the screen displays M767-V1.06-1TE8671F and the ami bios ID utilitydisplays 61-0828-001437-00101111-071595-440BX. Will this board run at 100Mhz? does the correct bios offer a multiplier to get the P III going? And finally, any leads on a manual to download..Thx, Dr. P.

Please visit the Pcchips Lottery to get a verification of your Board-ID
http://www.stud.fernuni-hagen.de/q3998142/pcchips/
Use the ... DO NOT KNOW ... section
Links to manual and Bios provided there

Thanks,
Got it flashed and recognized as P-III 800 at 100 Mhz, sucess. Thanks for the link I was able to get the manual...Happy Holidays and thanks again...Dr.P.