Page 1 of 1

What Brand do i have???

Posted: Sun May 04, 2003 3:48 pm
by Berre
Hello... Like many of you guys i f**ked up my bios by not read to carefully.
Anyway when i try to flash back i have to enter what chip, brandm type it is, so
my question to you all out there is: What is the bios info. i have on my mb...

My MB is a MSI KT333-ULTRA 2 ( Bios AMI MS-6380E )

... Clueless :( Thankful 4 all info possible..

Posted: Sun May 04, 2003 4:43 pm
by Berre
Hmmm... Checked the chip and it says:

W49F002UP12B , so can it be 49F002U_V3 ???
The only altern. that look the same in AMIFL827.EXE Ver. 8.27.38

When i try to flash it says:
Flash ROM cannot be correctly programmed....
Any clue? Can i force it some how???

Posted: Tue May 06, 2003 3:35 pm
by NickS
The Winbond application note says that it is a replacement for W29C020C, with the difference that Pin 1 is now defined as Reset where it was Not Connected. You could try Uniflash....

Posted: Tue May 06, 2003 10:14 pm
by Berre
It says... Organistion: ( N/A )
So i can´t do a thing with uniflash... :(

Posted: Wed May 07, 2003 1:04 pm
by Berre
Well... Guess i´m off too the store and buy a new MB.... Thx anyway...

Posted: Wed May 07, 2003 2:33 pm
by Denniss
Let your flashrom be reprogrammed or get a new one at your store or www.badflash.com