Page 1 of 1

82802ab/ intel / problem

Posted: Mon Dec 08, 2003 7:36 pm
by vgaudin
I got an intel ca810e motherboard.

with i810 and 82802ab flash chipset.
I need to save and flash bios from this motherboard.

But :
iflash tools from intel dont save and use a file format realy special ....
uniflash hang up only the 1.19 version detect correclty the chipset but impossible to save or flash
amiflash 8.27 dont detect only 8.22 run with /X and manually I am able to save the bios (it seems correct...)

So is there anyone that could help me to solve my problem.
or any experience ?

save and write bios it's sould be simple ?

Vincent

Posted: Tue Dec 16, 2003 9:04 pm
by edwin
http://support.intel.com/support/mother ... op/ca810e/

and use the recovery method if you want to flash an Intel bios on your Dell/Gateway board. At your own risk ofcourse.

ca810e

Posted: Wed Dec 17, 2003 1:12 pm
by vgaudin
ok I know the intel page but the iflash tools is not able to save the bios(resident flash)

so with intel tools it's not possible for me to save and flash bios.

and the file format used by intel is really spécial .bio .b01 .b02 with header text ... not really simple.

Could I found a soft able to save and flash bios with ca810e ?
not crashing ( uniflash) and able to flash ( amiflash read but hang up when flashing) ??
that's my question !

please help.