Page 1 of 1

Cannot flash NF7-S BIOS with uniflasher

Posted: Wed Jan 07, 2004 1:06 am
by Timestalker
I got P4C800-E and tried to hotflash dead NF7-s PMC 512Kb flash (mine board also use this flashrom) but Uniflash doesn't want to flash it - it detects it, reads it well - but when it comes to flashing - :(
also it cannot flash mine Flashrom
WTF?

Posted: Wed Jan 07, 2004 1:16 am
by edwin
post exact part number of both flashrom chips.

Posted: Wed Jan 07, 2004 2:20 am
by Timestalker
they are detected as "18:20:05.99: Flash ROM chip detected: PMC Pm49FL004/3.3V (LPC/FWH)" and that's true, imho.

Posted: Wed Jan 07, 2004 11:19 pm
by Timestalker
what is exact part number? where I can find it? thanks

Posted: Thu Jan 08, 2004 9:02 pm
by Denniss
Should be impossible to hot-flash a Firnmware Hub(FWH) type Flashrom with a mainboard using "standard" Flashroms .
You'll need an Intel machine using these Firmwarehubs as Flashrom to hot-flash

Posted: Sat Jan 10, 2004 5:33 pm
by Timestalker
hey Denniss I tryed to flash it with my ASUS P4C800-E MoBo (it's on I875P Chipset)
I tried uniflash but nothing happened (it reads flashrom, but cannot flash it, and it cannot flash my Motherboard flashrom but also - no effect)
Also I tried AwardFlasher ver 8.12 but it hangs on flashing screen (shows a "Please Wait" message and nothing happends after)
So, WTF people? Help me please!

Posted: Sun Jan 18, 2004 7:00 pm
by Timestalker
*bump*
so people - any1 help me please - mine friend is still siting w/o MoBo! :(

Posted: Sun Jan 18, 2004 7:58 pm
by Denniss
Some kind of misunderstanding here ....

Most if not all Intel i84x/865/875 Board have Firmware Hub type flashroms but nForce and most other mainboards have a "standard" type Flashrom

They are not compatible to each other .

Try to find a motherboard using "standard" flashroms and capabl of flashing a 512KB flashrom

Posted: Sun Jan 18, 2004 10:17 pm
by Timestalker
Thanks for reply, Denniss, now I got it,
but where I can find mobo with such kind of socket for eeprom with support of 512 Kb :?
And maybe I can try to flash it on another NF7-S ???
AFAIK, uniflash doesn't work with nforce 2 MoBo's

btw - I tried to flash this dead eeprom on working NF7-S before but using standart utility - but nothing happened (awdflash said about some kind of values in LAN and etc and halted to continue)
So, any ideas? Will be very grateful!
Or maybe someone know mobo I should look for?

Posted: Mon Jan 19, 2004 11:41 am
by sulbert
Denniss wrote:...and most other mainboards have a "standard" type Flashrom...
AFAIK Nforce2 boards do use FWH/LPC type flash chips. At least NF7 does...