Page 1 of 1

need help

Posted: Thu Dec 14, 2006 4:13 am
by bikerbilly18
i need a bios program that will allow me 2 flash an older bios than is currently installed , and it must load in dos
im stuck at award bootblock bios v1.0
bus award tool wonlt let me install my bios file
thanx

Posted: Thu Dec 14, 2006 5:27 pm
by ajzchips
Why don't you tell us what mobo you have, what you've done, what versions of flashers you're using, etc.?

my info

Posted: Fri Dec 15, 2006 1:03 am
by bikerbilly18
i have a dfi ca64-tc mobo
i tryed 2 use the winbios flasher from inside windows as the manufacturere suggested
i rebooted my computer and got a bios checsum error

the screen shows award bootbolck bios v1.0

and it tryes 2 boot from a dos floppy disk
the dos boot is successful

i tryed using award bios flasher from dos , it will load
when i load the newest bios.bin from the motherboard site
the flashing utility tells no it is not a new bios and will not flash it

Posted: Fri Dec 15, 2006 1:27 pm
by Denniss
Try Uniflash - www.uniflash.org

Check your board for a revision number, DFI lists Rev A&B and Rev C; they use different Bios files.

http://www.dfi.com.tw/Support/Download/ ... =A&SITE=NA

it worked

Posted: Sat Dec 16, 2006 12:39 pm
by bikerbilly18
great application , it worked nicely :)