Trying to overclock a Dell Dimension 2350 NEED HELP!!
Posted: Sun Oct 21, 2007 5:19 pm
Here are my specs:
System Info
Model : Dell Dimension 2350
Chassis Type : Desktop
Service Tag : 7B0GR21
Operating System : Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Processor
Number Of Processors : 1
Type : Intel Pentium 4 2600 MHz
Processors Bus Speed : 800 MHz
Motherboard
Manufacturer : Dell Computer Corporation
Model : 07W080 Rev. A00
CPU Slot/Socket Type : Socket 478 mPGA
Chipset Vendor : Intel i845GL Rev. B1
Bios Manufacturer : Mitac International
Bios Version : A02
Graphics
Model : nVidia PCI NVIDIA GeForce 6200
PCI Speed : Not Available
Monitor : Plug and Play Monitor
Storage
Hard Drive 1 : IC35L060AVV207-0
Size : 57.22 GB
Hard Drive 2 : Maxtor 6K040L0
Size : 39.21 GB
Memory
Total RAM Installed : 1024 MB
Type : DDR DIMM PC2700
Used RAM Slots: 2 of 2
Accessories
USB Version : Not Available
I upgraded the cpu from a 2.2 GHZ to a 2.6 but I cannot access the BIOS. It appears DELL has locked the BIOS screen to change the settings? How can I get around this? Step by step detail would be great!!
THANKS
System Info
Model : Dell Dimension 2350
Chassis Type : Desktop
Service Tag : 7B0GR21
Operating System : Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Processor
Number Of Processors : 1
Type : Intel Pentium 4 2600 MHz
Processors Bus Speed : 800 MHz
Motherboard
Manufacturer : Dell Computer Corporation
Model : 07W080 Rev. A00
CPU Slot/Socket Type : Socket 478 mPGA
Chipset Vendor : Intel i845GL Rev. B1
Bios Manufacturer : Mitac International
Bios Version : A02
Graphics
Model : nVidia PCI NVIDIA GeForce 6200
PCI Speed : Not Available
Monitor : Plug and Play Monitor
Storage
Hard Drive 1 : IC35L060AVV207-0
Size : 57.22 GB
Hard Drive 2 : Maxtor 6K040L0
Size : 39.21 GB
Memory
Total RAM Installed : 1024 MB
Type : DDR DIMM PC2700
Used RAM Slots: 2 of 2
Accessories
USB Version : Not Available
I upgraded the cpu from a 2.2 GHZ to a 2.6 but I cannot access the BIOS. It appears DELL has locked the BIOS screen to change the settings? How can I get around this? Step by step detail would be great!!
THANKS