Getting BIOS image from Fujitsu-Siemens .ocf files?
Posted: Sun Jun 11, 2006 9:08 pm
I have Fujitsu-Siemens D1214 board that seems to have a BIOS problem. There is recovery mode but it does not work - as I probably don't have proper BIOS rescue disk (and haven't found how to create one).
The BIOS update disk from Fujitsu-Siemens contains flasher and some .ocf and .omf files. But I need 512KB image to flash into the flash ROM chip...
I took working D1025 board and saved the flash image from it. Then compared with contents of BIOS update disk - and found no obvious way to create the image
The BIOS update disk from Fujitsu-Siemens contains flasher and some .ocf and .omf files. But I need 512KB image to flash into the flash ROM chip...
I took working D1025 board and saved the flash image from it. Then compared with contents of BIOS update disk - and found no obvious way to create the image