SiS 730s chipset - can it change multiplier?
Posted: Sun Oct 15, 2006 7:08 pm
I got a PC chips M810S v7.0a board as dead, managed to fix it, even it shoot caps at me back, recapped it and now I want let it fold. The problem - the bios show NO WAY to change multiplicator above the default 11 for my oldie unlocked Barton 2500+.
Also, the max FSB is 133Mhz.
This give only 133x11 - 1463Mhz. A way too low for the nice there phase voltage regulator and quality Samxon GC caps I used for the recap. Foding run very slow on this one... Also the Zalman CNPS 7000Cu is entierly useless there as well, as the cool Revoltec heatsink I added on the chipset.
So, the question is - can the SiS 730s chipset change multiplicators in AXP cpu's at all? I have oldie unlocked Barton - not mobile - and there is no multiplicator option in bios (as well, as no voltage option).
And, the cursed AmiBCP keep saying that the bios is invalid, tough I flashed it to the board already... (the bios file start is a bit weird, too much empty, and then code...)
Anyway, the question is, if I can hope that the chipset CAN change the multi at all. If not, then there is no point of bothering with bios modding, even the bios is VERY spartan and comparing to ESC P6STMT bios with million and one timing option and settings this one suxx...
Bios link there, in case anyone care:
http://www.pcchips.com.tw/PCCWeb/Downlo ... lDesc=M810
Also, the max FSB is 133Mhz.
This give only 133x11 - 1463Mhz. A way too low for the nice there phase voltage regulator and quality Samxon GC caps I used for the recap. Foding run very slow on this one... Also the Zalman CNPS 7000Cu is entierly useless there as well, as the cool Revoltec heatsink I added on the chipset.
So, the question is - can the SiS 730s chipset change multiplicators in AXP cpu's at all? I have oldie unlocked Barton - not mobile - and there is no multiplicator option in bios (as well, as no voltage option).
And, the cursed AmiBCP keep saying that the bios is invalid, tough I flashed it to the board already... (the bios file start is a bit weird, too much empty, and then code...)
Anyway, the question is, if I can hope that the chipset CAN change the multi at all. If not, then there is no point of bothering with bios modding, even the bios is VERY spartan and comparing to ESC P6STMT bios with million and one timing option and settings this one suxx...
Bios link there, in case anyone care:
http://www.pcchips.com.tw/PCCWeb/Downlo ... lDesc=M810