HELP - BIOS mod for Conroe865PE
Posted: Thu Nov 16, 2006 10:41 pm
There is very nice cheap Intel Core2Duo board ASROCK Conroe865PE (VGA,PCI,DDR).
http://www.asrock.com/product/ConRoe865PE.htm
It has asupport for FSB1066,but there is lock on some FSM:MEM dividers for FSB 1066. Today there are DDR1 for base freq 266MHz, but this BIOS disables support for FSB:MEM 1:1 ratio on 1066MHz (266MHz base freq). This divider 1:1 works for 800MHz FSB (base 200MHz), but it is disabled for C2D Processors on 1066MHz. Where (in which AMIBIOS module) could be dividers table. Please help - any tips for BIOS module ID or offset?
http://www.asrock.com/product/ConRoe865PE.htm
It has asupport for FSB1066,but there is lock on some FSM:MEM dividers for FSB 1066. Today there are DDR1 for base freq 266MHz, but this BIOS disables support for FSB:MEM 1:1 ratio on 1066MHz (266MHz base freq). This divider 1:1 works for 800MHz FSB (base 200MHz), but it is disabled for C2D Processors on 1066MHz. Where (in which AMIBIOS module) could be dividers table. Please help - any tips for BIOS module ID or offset?
