Acer 6592G Bios required- key board and trackpad issue
Posted: Fri Aug 01, 2008 5:35 pm
Hello, i have an acer 6592G laptop, i was having problem with it running really hot, as the laptop is new , i decided tp update the bios and see if that helps. But after the Update the keyboard and mouse won't work.
Is it possible that the V1.52 update, updated other parts of the Laptop etc. like update Key board and trackpad firmware, so even with a downgrade of the bios, the keyboard and trackpad will still remain update
I used winplash to flash it, it made a backup of the BIOS.
I have tried all the bios available on acer's site, still no solution.
I tried re-flashing the backup bios but winphlash won't throws up errors when i try to flash it. It always says
Corrupted interface descriptors in the new BIOS file.
Part table signature Not found in the interface error code:- 161
Can some one please let me know how i can make my back up Bios file work, so that i can re-flash it back on the Laptop.
i have also tried open it in Phoenix editor, but it wont open the back up bios, it always throws up this error- Invalid Rom length.
Can some one please let me know how i can make my back up Bios file work, so that i can re-flash it back on the Laptop.
Or is any one has an unaltered Acer 6592G laptop bios V 1.25 ,V 1.23, V1.22.
thankyou very much in advance
I apologize if this does not belong in this section of the forum.
thanks
Is it possible that the V1.52 update, updated other parts of the Laptop etc. like update Key board and trackpad firmware, so even with a downgrade of the bios, the keyboard and trackpad will still remain update
I used winplash to flash it, it made a backup of the BIOS.
I have tried all the bios available on acer's site, still no solution.
I tried re-flashing the backup bios but winphlash won't throws up errors when i try to flash it. It always says
Corrupted interface descriptors in the new BIOS file.
Part table signature Not found in the interface error code:- 161
Can some one please let me know how i can make my back up Bios file work, so that i can re-flash it back on the Laptop.
i have also tried open it in Phoenix editor, but it wont open the back up bios, it always throws up this error- Invalid Rom length.
Can some one please let me know how i can make my back up Bios file work, so that i can re-flash it back on the Laptop.
Or is any one has an unaltered Acer 6592G laptop bios V 1.25 ,V 1.23, V1.22.
thankyou very much in advance
I apologize if this does not belong in this section of the forum.
thanks