Acer Aspire 4752G BIOS update failure
Posted: Wed Sep 11, 2013 2:36 pm
Hi.
I was installing BIOS downloaded from acer support site BIOS_Acer_1.24_A_A and when i run it, it does everthing itself and the computer restarts automatically and stuck on black screen. There is no boot screen neither it goes to the BIOS setup.
I did a lot of research and I found and browsed hundreds of pages about WINCRIS.
I gets accessed with Fn+Esc, when I press and hold Fn+Esc and then I connect the power adapter (with battery disconnected) press the power button the computer keeps running, fan is running, and it is checking HD and CD-ROM drives and the bootable USB's LED (which is created by WINCRIS) flash for a second.
The images of the WINCRIS Recovery Disk containing phlash16.exe, BIOS.WPH (JE40124.WPH renamed) and MINIDOS.SYS.
Still no change..
Please advice, what is the procedure and BIOS.
I was installing BIOS downloaded from acer support site BIOS_Acer_1.24_A_A and when i run it, it does everthing itself and the computer restarts automatically and stuck on black screen. There is no boot screen neither it goes to the BIOS setup.
I did a lot of research and I found and browsed hundreds of pages about WINCRIS.
I gets accessed with Fn+Esc, when I press and hold Fn+Esc and then I connect the power adapter (with battery disconnected) press the power button the computer keeps running, fan is running, and it is checking HD and CD-ROM drives and the bootable USB's LED (which is created by WINCRIS) flash for a second.
The images of the WINCRIS Recovery Disk containing phlash16.exe, BIOS.WPH (JE40124.WPH renamed) and MINIDOS.SYS.
Still no change..
Please advice, what is the procedure and BIOS.