Siemens Mobile 700 Bios recover
Posted: Fri Feb 07, 2003 8:31 pm
Hi all,
and yes, the nb (5 years, the last 2 in a 'deep sleeping mode') is dead. W95 without hardware errors.
After a flash with original ugbiosfe.exe the screen stay black, only a short floppy action (bootloader, 1s).
I've tried all well known names for the bios file, boot floppy
with autoexec.bat (ugbiosfe /s bios.bin - from the Siemens Hotline)
- no sucess.
Time is to short to read the image, floppy sounds like a short search.
Phoenix NoteBios 4.xx I believe. Bios chip is a AM29F002T.
What can I do? Using a other flashtool (uniflash)?
Sparc
and yes, the nb (5 years, the last 2 in a 'deep sleeping mode') is dead. W95 without hardware errors.
After a flash with original ugbiosfe.exe the screen stay black, only a short floppy action (bootloader, 1s).
I've tried all well known names for the bios file, boot floppy
with autoexec.bat (ugbiosfe /s bios.bin - from the Siemens Hotline)
- no sucess.
Time is to short to read the image, floppy sounds like a short search.
Phoenix NoteBios 4.xx I believe. Bios chip is a AM29F002T.
What can I do? Using a other flashtool (uniflash)?
Sparc