Page 1 of 1

Compaq Armada 110 DIP-switches

Posted: Mon Feb 07, 2005 3:28 am
by ajzchips
Do any of you know the definition of each of the 4 DIP switches next to the CPU socket on the Armada 110 laptops? If not, could you please post your current switch positions and the processor you've got installed?
I'd appreciate this a lot.

Posted: Mon Feb 07, 2005 12:47 pm
by Toby B
Neville Paintin <> wrote:
> Anyone know what the dip switches are for that are located on the
> motherboard just beside the CPU socket of a Compaq Armada 110?

They're for setting the BUSS speed for the various processors the system can

1.0 GHz Intel Pentium III
1.0 GHz Celeron
850 MHz Intel Pentium III
850 MHZ Intel Celeron
800 MHz Intel Pentium III
700 MHz Intel Celeron



still trying to dig up info for you...

Posted: Mon Feb 07, 2005 3:18 pm
by ajzchips
Thanks, Toby. Before you posted that, I had already contacted Neville... but he didn't have the info... :cry:
It seems like the Compaq EVO N110 uses the very same mobo, so perhaps this additional info might help...

Posted: Tue Feb 08, 2005 5:25 am
by Toby B
The EVO N110 is listed as being the same, but finding info is going to be tough either way..

Posted: Tue Feb 08, 2005 5:35 am
by Toby B
Try this one out Alberto: ... ev3_us.pdf
10.x MB its taking a bit to download and open for me..