Page 1 of 1
Upgrading from pii to piii, thinkpad 600e
Posted: Fri Dec 21, 2007 1:45 am
by spacemaggot
Sharedoc.....was wondering if you could post a set of instructions for upgrading from the original pii to a 600mhz piii on my tpad 600e- I don't want to overclock it... just looking for a list of your most successful steps...thanx in advance... if not... thanx anyway
Posted: Fri Dec 21, 2007 6:23 pm
by Sharedoc
Short instructions /Long instructions
Posted: Fri Dec 21, 2007 6:38 pm
by spacemaggot
Thanx!!! Let you know how things go.....
re: piii upgrade mod
Posted: Sat Dec 22, 2007 2:10 am
by spacemaggot
Sharedoc- just wanting some clarification on the mod.... first.. what's a "folio"? Second, am I to jump from pin 25 to pin 48 with the resistor AND desolder pin 25 from the board, or just put the resistor in and leave pin 25 connected to the main board? Thanks...I'm waiting for an extra mother board before I attempt this- those surface mount components are a bitch!
Again, thanks for the info and have a Merry Christmas...or Hanukah...or Kwanza...whichever the case may be.
Posted: Tue Dec 25, 2007 5:34 pm
by Sharedoc
Folio = conductive layer on printed circuit board.
