Hello
I have a MSI 5184 ver1! How do i change the voltage from 12 V on the VPP pin to 5V????is there a jumper or something?in the manual it doesn't say anything about this!!!!
Thank you
Alex.
Jumper for Voltage?????
-
- Chip off the ol' block
- Posts: 105
- Joined: Thu Mar 11, 2004 8:24 pm
- Location: Bucharest,Romania
- Contact:
-
- Chip off the ol' block
- Posts: 105
- Joined: Thu Mar 11, 2004 8:24 pm
- Location: Bucharest,Romania
- Contact:
Yes i understand, but the vpp pin it's not internally disconnected since i was able to flash it into an another board a Pcchips M539 at a voltage of 5V.My question ist's if this 12V on the vpp pin could erase the data in the chip?????????
Thank you for your reply
Alex.
Thank you for your reply
Alex.
-
- Chip off the ol' block
- Posts: 105
- Joined: Thu Mar 11, 2004 8:24 pm
- Location: Bucharest,Romania
- Contact:
Hi
O.K. thanks for the info!
This should eliminate the bios from beign faulty since the 12 V do not erase it.It means that the board it's damaged somehow somewhere if itt doesn't initialize.I posted something on this on the 'my motherboard it's dead' if you want to take a look and ask me everythin you need to diagnose as much as you can the problem but it surely it's something wrong with the board!!!unfortunately
O.K. thanks for the info!
This should eliminate the bios from beign faulty since the 12 V do not erase it.It means that the board it's damaged somehow somewhere if itt doesn't initialize.I posted something on this on the 'my motherboard it's dead' if you want to take a look and ask me everythin you need to diagnose as much as you can the problem but it surely it's something wrong with the board!!!unfortunately