Monitor problems and BIOS

Ask a question about your computer setup.
Post Reply
Myaustralia
New visitors - please read the rules.
Posts: 3
Joined: Mon Jun 17, 2002 11:52 am

Hi

I changed the monitor setting from 16 Bit to 256 colours and now when I reboot the computer the monitor will boot up, windows 98 starts and then stops and goes to a black screen after doing a scan disc. I can not change back to 16 bit colour screen resolution.

What has happened to my BIOS or CMOS settings? :(

I am usins a AMD K6 / 2 - 450 processessor and 576 megs of Ram.

All information gratefully received

Geoff
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

This isn't a BIOS issue. This has to do with your VGA card and your monitor.
Setting it to 256 colors might have activated a refresh rate your monitor cannot support.
Are you using an old monitor?
Myaustralia
New visitors - please read the rules.
Posts: 3
Joined: Mon Jun 17, 2002 11:52 am

Hi El cheapo dude

Thank you for the reply, yes it is an older 15 inch monitor and yes you are right perhaps it can not refresh.

How can I fix the problem when I can not see the screen on the monitor?

Geoff
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Try hitting F8 when booting to enter Safe Mode. You'll then be able to access your Windows desktop and perform the changes.
Myaustralia
New visitors - please read the rules.
Posts: 3
Joined: Mon Jun 17, 2002 11:52 am

Thank you the problem is solved.

Continual hitting of the F8 button from the time the computer is turned on allowed me to go to safe mode then I made the adjustments and the monitor returned to normal. Thanks to all.

Geoff
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Thanks for the feedback. Much appreciated.
Post Reply