POST test failure on Abit KG7 Raid board

Ask a question about your computer setup.
Post Reply
itisjp
New visitors - please read the rules.
Posts: 2
Joined: Thu Jun 20, 2002 1:43 am

I have a post test failure. The main board is a KG7 Raid. It uses AMD761/VIA 686B chip set and SoftMenu™III BIOS. When I turn the power on I get two long beeps and they keep repeating until I turn the power off. The computer never boots. My setup is an AMD 1.4 MHz processor, two IBM desk star 40 GB hard drives (set to raid striping), GeForce 3 video card, Sound Blaster 5.1 sound card, CD read write, DVD rom, 512 MB DDR memory. Any suggestions as to what the two beeps mean? I have tried to find it on various pages with no luck or do not understand what I am look at. Any help would be greatly appreciated.
Sincerely,
Jp
itisjp
New visitors - please read the rules.
Posts: 2
Joined: Thu Jun 20, 2002 1:43 am

I found the problem. It was the keyboard. I unplugged the keyboard and started the computer and it started with no problems. If anyone would like to explain why. I would love to hear it.
Post Reply