houston technologies - M7171-S8-AT

How-to identify your motherboard ?
Post Reply
winbetaxp
New visitors - please read the rules.
Posts: 3
Joined: Sat Jan 18, 2003 8:55 pm

houston technologies....M7171-S8-AT
give me some info or available bios updates or a website for this board?
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

relabeled PC Chips M717 perhaps?

Image
edwin/evasive

Do not assume anything

System error, strike any user to continue...
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

edwin wrote:relabeled PC Chips M717 perhaps?
I'm surprised it doesn't have one of those horrible Houston Tech CMOS/RTC chips :)
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

hehe. You'd reckon they only relabel the PC Chips boards that actually have one of those BS thingies on them then?
edwin/evasive

Do not assume anything

System error, strike any user to continue...
winbetaxp
New visitors - please read the rules.
Posts: 3
Joined: Sat Jan 18, 2003 8:55 pm

thanks so much for the info.....

another question... atx form factor card...i dont have one..do i really need to purchase the card for using the usb, ps2 mouse and ird ?

if the pins are known can i just put plug on pins and wire it correctly for all the devices? usb mouse .etc
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

My ATX form card also has some R/C decoupling to prevent RF emission by the look of it, plus the odd inductor and power smoothing cap, but nothing fancy. In principle you should be able to build your own cables.
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
winbetaxp
New visitors - please read the rules.
Posts: 3
Joined: Sat Jan 18, 2003 8:55 pm

connector ...done....successful

pins for mouse and usb ...a little orientation of the pins was tricky with the diagrams and running usb camera

tested...works great !!!!

thanks to everyone who replied !!!!!!
:D :D :D :D :D
Post Reply