BIOS Updates forum

Thanks for the help. I've found out plenty about this board now.. I don't know if the AGP function is working properly or not. I guess it must be because setting PCI in the BIOS or by jumper stops the PC from booting up. However, the utilities I used to check seem to suggest that AGP is not enabled....

I am still unable to get the onboard graphics (ATI Rage, 4mb) to work in AGP. I have checked the relevant jumpers on the board and re-checked th BIOS isn't set to PCI but can't seem to make any progress. Maybe it wouldn't make any difference but it would be nice to find out one way or the other.. De...

The board is marked as FLORIDA C. I found and successfully flashed the bios to a later version without problem but I still can't get the board to enable the AGP. I have checked all the bios settings and the mb jumpers which seem ok. I have also tried adjusting things through the Powerstrip utility b...

Incidentally, in addition to the bios id string I gave earlier, I also see that, on start up, the following is added to the string... FLORIDA-STD-H, If that is relevant....

I was trying to find out if I could enable the AGP setting which apparently is not being used by the onboard graphics card at the moment. I've enabled it in the bios but apparently it isn't being utilised. I can't see any other options to do this.

Is a later bios likely to facilitate this??

:!: This is a generic PC I've been using for a couple of years. All I've been able to find out so far is that TriGen in Korea had something to do with the motherboard but nothing else. The normal tools don't seem to recognise 2699 as a valid manufacturer. As the bios is reported by SiSoft Sandra as ...