ADDING BIOS LOGO Problem

[roy.reglan]

Any can help me add a bios logo to my Tomato BX98 Motherboard i try using cbrom6 and it give me this error:

When i Try to run with this string.
CBROM6.EXE BX98.BIN /logo Logos.bmp
and gives me this message.
CBROM V6.03B (c) Award Software 1999. All Rights Reserved.
ADDING LOGOS.BMP 50.4%
BX98.BIN have not enough space for adding ROM. (Over 01C3h bytes)

When i Try to run with this string.
CBROM6.EXE BX98.BIN /logo
and gives me this message.
CBROM V6.03B (c) Award Software 1999. All Rights Reserved.
Not found i:\eprom\D4LOGO.BMP !!!

The logo size is 160 x 140 in 256 Colors.
Can anybody help with this problem of mine.

[NickS]

Can you post a link to the instructions you followed ?

[NickS]

Did you release the existing epa logo file from the .BIN ?

[tomuf]

you don't have enough free space in ROM - you must free some space; maybe freeing old logo will help you cbrom6 bios.bin /logo release; if it doesn't, you can try to release something else, but don't release anything you aren't 100% sure what does; for example, my A7V333 MB has optional RAID controller and BIOS is present even for A7V333 boards that don't have it - it takes about 30kb of ROM so it is good idea to release it when it isn't needed...