Expect UniFlash v1.27 soon

Discusses BIOS flashers and utilities from Award, AMI and Uniflash
Post Reply
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Expect UniFlash v1.27 soon. Atmel AT29Cxxx detection fixed, SiS630 with IT8705F flashing works...
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
edwin
The Hardware Archivist
Posts: 6273
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Got a weird question. Is it possible to use Uniflash to get the BIOS from an EPROM?
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

It should be able to read EPROM - but never tried it.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

ECS K7S5A flashed successfully (SiS735) - without datasheets :lol:
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
kclim528
New visitors - please read the rules.
Posts: 9
Joined: Mon May 27, 2002 7:39 am

8O Hello... Rainbow, i'm new user kclim528... i just want to know that whether the uniflash 1.26 support the "detected" VIA chip like VT8361 as stated in the uniflash.doc that comes together with the flash program...
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

All detected chipsets have some code associated so they should work but some of them do not (and some works on some boards and not on other) - you have to try it.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
kclim528
New visitors - please read the rules.
Posts: 9
Joined: Mon May 27, 2002 7:39 am

8O Can i use the mobo that originally use the eeprom chip Winbond 49F002U /5V to flash other flash eeprom chip MXIC 28F1000AP /12V or MXIC 28F2000TPC /12V that use 12volt... Pls reply soon...

regards
kclim528
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Check if there's 12V on the VPP pin - if not, you need to make a simple adapter. http://rainbow.ht.st/hardware/hotflash.html
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
kclim528
New visitors - please read the rules.
Posts: 9
Joined: Mon May 27, 2002 7:39 am

8O How about the PLCC type?
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

You should be able to do the same thing - you just need the pinout of your chip - see datasheet (search the web using Google).
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Post Reply