PCI600-F
I have a PCI600-F and I just bought a PIII 700 for it, I know the BX chipset can run it, its a Coppermine 100mhz so thats not an issue and the bios says 700, just wont go back the CPU id string. Is there a bios to update mine with, my bios is 1.2 and I cant find anything on Jbond board.
-
Denniss
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
If your Bios-ID is i440BX-SMC60X-2A69KJ3AC-00 then go to
http://www.driverchina.com/downinfo/18232.html
Make sure the file you downloaded has 262144 bytes, if not it's damaged and may cause a dead board.
http://www.driverchina.com/downinfo/18232.html
Make sure the file you downloaded has 262144 bytes, if not it's damaged and may cause a dead board.
-
edwin
- The Hardware Archivist
- Posts: 6287
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
early 440BX boards were limited to P2-450 because of the onboard regulators. Not all boards run a P3-700 without problems...
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...