BIOS Updates forum

I forget about this topic I had made.I solve the problem.It's motherboard problem.There are 2 version of Asus P4PE/TE.It's v.1.1 and v.2.0.Version 1.1 does not suport Presscot familiy at all but v.2.0 suports 533MHz Preccot family. I changed my motherboard with the same one only ver.2.0 and it work ...

See http://developer.intel.com/design/Pentium4/prodbref/#800 Intel® Pentium® 4 Processor Family Line Items Speed Cache size Hyper-Threading System Bus Package Product name 2.40 GHz 512KB No 400MHz mPGA478 Intel Pentium 4 processor 2.40 GHz 2.40A GHz 1MB L2 No 533MHz mPGA478 Intel Pentium 4 processor...

I have read that.I used tenth-s of diferent memoryes (in most case 333MHz becouse of sinhronius work including Kingstone,Hynix,Samsung,Smart,A-Data) and 400MHz Exlair but it should work on all 333MHz modules (especial on Kingstone).

Try new ATX.Nothing.The same.I read it on the intel site that Prescot CPU core voltage is in 1.2v-1.4V and for Northwood about 1.5V.But it's logic that M/B recognize CPU core voltage becouse default settings for CPU core voltage is: AUTO. But there is no logic!?Any idea?

I have a problem. I have MB Asus P4PE-X TE and it doesn't work with my new procesor. Before changing procesor: My motherboard work fine with Intel Celeron 2400MHz Northwood (FSB was 400MHz,128KB cash and of course my memory run at 266Mhz_even it is 333MHz modul). Bios was updeted to newer reliece 10...

I had dual boot system. On the Primary Master I had one HDD 60GB and on the Primary Slave I had HDD 20GB.I first instal WIN Xp on the HDD 60GB and after few months I Instal Win 98 on the second HDD 20GB.And of course at the begining of booting I had choice to set win XP or 98 to start.First choice w...

I think that is the MB.I'll send to him to try.Thanks Rainbow.

My friends friend lose MB manual and I need help to identify MB.He don't know the manufacturer of his motherbard and he don't see anything on the motherboard (it is probable NoName MB and when I said NoName I mean NoName).The only way is this Left uper corner: P4ITA v1.0 Left down corner: 06142001-I...

I tryed something more.I opened CD-RW and looked what happend.When I put small CD it starts to turn it around (motor) but I think with very small speed (power) and starts to read it.But when I put big CD it tryes to turn it around but like it (motor) has no power to turn it faster and laser did not ...

Remove CMOS battery from motherboard and put it back.It should back BIOS settings to default.

Wrong.Not read all Verbatim CD-R I tried.I think is hevy problem.Help.

New moment. It reads Verbatim small and normal CD-RW-s but it looks like Verbatim is not so havy like others NoName CD-R-s I tried (maybe is subjectiv opinion).

I tryed with firmware update and cleaninig optic lans but no results.Still reads small and not reading normal Cd-s.If the problem is in mechanical part (motor belt,calibration etc. You have mentioned Ajz) is it possible to fix the mechanic problem and how.Sugestions.

If You set first to boot from CD and if there is no boot CD in drive bios will jump to the next boot device You set in boot menu (floppy,HDD,etc.).But if You use original Windows XP CD it should boot from it.

Probably option Fllopy seek is enabled.Set it to disabled.But it does not refer to boot and it should boot from CD anyway.Option floppy seek refers about tipe of floppy and it start to seek floppy before booting.When you set it do disable it choudnt seek floppy and should start boot in order You set...