80GB: ECS P6BAT-A+ PCB 1.1

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
Inti31
New visitors - please read the rules.
Posts: 2
Joined: Wed Feb 26, 2003 12:20 pm

I've the latest BIOS 1.0h from the ECS-Homepage.
The BIOS will not detect the Primary Master Harddisk MAXTOR 80GB (4D080H4)(=DiamondMax D540X-4D), System hangs.
Only if I set the Jumper on LimitCylinder too, the BIOS detect the Harddisk,
But when i will install w2k/XP, the System show me only 32GB (one Harddisk-partition, but the harddisk is always partitioned.
The BIOS Setting for Primary Master ist set to AUTO
What Should I Do? Help me please
Sorry about my bad english.

Thanks a lot
Harry
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

use at own risk

http://wims.rainbow-software.org/edwin/

please report results.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Inti31
New visitors - please read the rules.
Posts: 2
Joined: Wed Feb 26, 2003 12:20 pm

I've flashed the BIOS with the Beta Fw 128GB - all works fine.
No Probs. The Management of all Partitions is okay.


Harry :)

Sorry - my english :)
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Harry, don't worry about your English. Thank you for reporting :D
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply