i have bought samsung sm-352b combo cd writer but it is in the mode 33 mb bit ata.how can ı make it to ultra ata 100?
i updated my bios so i can use 120 giga disks as well.
my two disks is in mode uata 100 i made with seagate program but cd writer is in mode 33 mbit
help me
gokovav@yahoo.com
LX chipset limitations
Not a BIOS problem. You cannot change it.
Drive spec:
Multiword DMA mode 2:16.6MB/sec
Ultra DMA mode 2:33.3MB/sec
Drive spec:
Multiword DMA mode 2:16.6MB/sec
Ultra DMA mode 2:33.3MB/sec
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
-
KachiWachi
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
What motherboard, OS, etc... are we using here?
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
-
KachiWachi
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
http://www.samsung.com/Products/CDDVD_W ... 52B_sp.htm
Like NickS said... can't be done... UDMA Mode 2 Max (33.3MB/sec).
Like NickS said... can't be done... UDMA Mode 2 Max (33.3MB/sec).
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
i have the most updated nero program .
when i put blank cd on it shows write max 40 when it is empty it shows 52 max.
but the blank cd i put is already 56 x compatible.
and also read speed is 40 max.
i have 2 seagate 1 maxtor disk.2 seagate is in uata100 mode i made it with seagate tool.
but my maxtor is uata66 mode.
and cdrw is yata33 mode.
how can i make it to uatat100.
is this problem arise from my motherboard?
its model is
Award Modular BIOS v4.51PG
07/30/1998-i440LX-ITE867-2A69JF99C-00
FOR 6LX66 AGP/PCI/ISA MODE BIOS VER:A13 128GB BETA
Intel 440EX/LX rev 3
how can i learn that my mother board supports what ide speeds?
thanks
when i put blank cd on it shows write max 40 when it is empty it shows 52 max.
but the blank cd i put is already 56 x compatible.
and also read speed is 40 max.
i have 2 seagate 1 maxtor disk.2 seagate is in uata100 mode i made it with seagate tool.
but my maxtor is uata66 mode.
and cdrw is yata33 mode.
how can i make it to uatat100.
is this problem arise from my motherboard?
its model is
Award Modular BIOS v4.51PG
07/30/1998-i440LX-ITE867-2A69JF99C-00
FOR 6LX66 AGP/PCI/ISA MODE BIOS VER:A13 128GB BETA
Intel 440EX/LX rev 3
how can i learn that my mother board supports what ide speeds?
thanks
-
soupy
- Absentee administrator
- Posts: 1086
- Joined: Thu Mar 21, 2002 1:06 am
- Location: Ontario, Canada
- Contact:
So, either the CD really isn't 56x speed compatible, or your system just can't burn that fast and Nero is throttling back.gokovav wrote:i have the most updated nero program .
when i put blank cd on it shows write max 40 when it is empty it shows 52 max.
but the blank cd i put is already 56 x compatible.
and also read speed is 40 max.
No, they aren't. Your chipset WILL NOT RUN ANY FASTER THAN ATA-33.i have 2 seagate 1 maxtor disk.2 seagate is in uata100 mode i made it with seagate tool.
but my maxtor is uata66 mode.
http://developer.intel.com/design/chips ... 50_440.htm
Buy an EIDE controller card and a CDRW that supports ATA-100.and cdrw is yata33 mode.
how can i make it to uatat100.
It's an LX chipset.is this problem arise from my motherboard?
its model is
Award Modular BIOS v4.51PG
07/30/1998-i440LX-ITE867-2A69JF99C-00
See the link above.how can i learn that my mother board supports what ide speeds?
thanks
Flash your BIOS at your own risk.
