MS6151- Biosupdate not work

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
DonCaputto
New visitors - please read the rules.
Posts: 1
Joined: Mon Feb 13, 2006 5:51 am

hello,

sorry my bad english. I have updated to Maxdata Bios all three versions.
The Board say 8 GB is in. When i jumper the WD compatibily he say 33 GB is in the Board.
Then I played your D51IDE Bios on the board. The board can no HDD found.
With compatible WD jumper he found 33GB HDD.

You say 128 GB must found. What is wrong????


P.S. : WD 1600 JB HDD
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Try using AppleRom's BP utility... http://rom.by
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

DonCaputto wrote:P.S. : WD 1600 JB HDD
160GB >128GiB - not supported. You can use a utility to reduce the reported size of your HDD to 128GiB, e.g. http://www.hdat2.com/ then it should work with our patched BIOS.
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Post Reply