Hello,
My NEW 40 GB Hard disk Seagate is not supported by my bios.
Motherboard: Tomato(Zida) ZX98-CT
Bios Date: 12/17/1999
Bios ID: 61-0420-008031-00111111-071595-440BX-CRBX020-H
Brand: AMI BIOS
Version: 1.09
http://www.driverscollection.com/gf.php ... =697841096
I'll be very glad if any1 can patch it!
Please send it to tenkol@mail.bg
Thank you for your support.
My NEW 40 GB Hard disk Seagate is not supported by my bios.
As far as I'm aware AMI BIOSes are not patchable. However, there seems to be a newer BIOS, 1.16m:
ftp://ftp.levi.cz/pub/support/driver/mb ... 98116m.zip
The notes on http://support.levi.cz/soubor.php?produkt=ZX98-CT don't say anything about bigger hard drive support though. Looks like you're stuck with either restricting the drive capacity to 32 GiB (see jumper settings) or using an additional IDE controller (e.g. Promise Ultra100 TX2 with BIOS 2.20 b14 or later) which would also help performance.
ftp://ftp.levi.cz/pub/support/driver/mb ... 98116m.zip
The notes on http://support.levi.cz/soubor.php?produkt=ZX98-CT don't say anything about bigger hard drive support though. Looks like you're stuck with either restricting the drive capacity to 32 GiB (see jumper settings) or using an additional IDE controller (e.g. Promise Ultra100 TX2 with BIOS 2.20 b14 or later) which would also help performance.
Do you want some weirdness..I use a maxtor 8.6gb as Master and a seagate 40gb as slave on the same ide cable (cyrixMII-333) but only the maxtor exists as far as the bios is concerned. After xp was installed I hot swapped the seagate40 onto the cable and formatted it NTFS, After a reboot the seagate still doesn't exist in the bios but xp now calls it C:\ !! though it still boots from the Maxtor (F:\)????? The bios is still set to boot from C:\???? Strange but true..My thoughts..If it ain't broke don't fix it!! This is really WEIRD
Thank you for your support. This unofficia version l 1.16m - 1.1.2001 support 40GB HDD.stephan_g wrote:As far as I'm aware AMI BIOSes are not patchable. However, there seems to be a newer BIOS, 1.16m:
ftp://ftp.levi.cz/pub/support/driver/mb ... 98116m.zip
The notes on http://support.levi.cz/soubor.php?produkt=ZX98-CT don't say anything about bigger hard drive support though. Looks like you're stuck with either restricting the drive capacity to 32 GiB (see jumper settings) or using an additional IDE controller (e.g. Promise Ultra100 TX2 with BIOS 2.20 b14 or later) which would also help performance.
Thank you!!!