changed cpu, ram, gfx still does not work.
floppy dont power on
my system was working before the flash
Shuttle XPC SN45G (FN41/FN45) V1.0
1Gb twinmoss DDR400
AMD 2500+
can anyone help me
first post, please help
I had flashed my bios in a wrong way, when I try to boot, nothing come to the screen. so I ordered new preprgrammed chip. tried to use it but the same thing happen. just blank screen.
changed cpu, ram, gfx still does not work.
floppy dont power on
my system was working before the flash
Shuttle XPC SN45G (FN41/FN45) V1.0
1Gb twinmoss DDR400
AMD 2500+
can anyone help me
changed cpu, ram, gfx still does not work.
floppy dont power on
my system was working before the flash
Shuttle XPC SN45G (FN41/FN45) V1.0
1Gb twinmoss DDR400
AMD 2500+
can anyone help me
-
Denniss
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
Clear CMOS
If you are able to force the board to run with 100MHz FSB via jumper then try this,too
Are you sure you installed and ordered the correct Bios ?
-> FN41 and FN45 should be two different Boards
If you are able to force the board to run with 100MHz FSB via jumper then try this,too
Are you sure you installed and ordered the correct Bios ?
-> FN41 and FN45 should be two different Boards