Flashing via external programmer

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
New visitors - please read the rules.
Posts: 1
Joined: Sat Nov 22, 2008 8:11 pm

Hi Guys,
Have a DFI NF4 SLI INFINITY motherboard which failed during onboard
flashing.Some one has tried to prgramme it in an external programmer.
They tried a few diferent bioses but none worked.
I wish to try but as programmers usually ask for a STARTING ADDRESS,
i dont know what one should enter here.Does anyone know as i suspect
those that have tried may have used address 0.
Im pretty sure the board is ok and dont have another to hot swap.
Any help would be appreciated.
P.S Chip is a 49LF040.
Post Reply