#19453 by Orj
Wed Sep 10, 2003 1:27 pm
Recommended by Wim's BIOS... BIOS Agent scan: Upgrade your BIOS! DriverMax is the number one driver updater for Windows 8.1, Windows 8, Windows 7, Vista or XP
#19453 by Orj
Wed Sep 10, 2003 1:27 pm
Hello,
I tried to flash a FIC KA6110 (Apollo Pro, Award 4.51PG) with a new BIOS file. I used Awardflash 7.73 as recommended for this board. Something went wrong and the board went dead. It just sounded a double beep and the floppy lit up but it refused to read disks.
I did a Hot-flash using my Chaintech 7VJL (KT333). I tried Uniflash and AMI, but they couldn't do it. Then I used the Awardflash 8.24 (recommended for the 7VJL) and used the parameter /f to bypass the warning of checksum error.
Now the KA6110 turn on the monitor. The Bios version shows, Processor data shows, Memory tested OK, Plug and play version shows, System and SDRAM clock shows. Then... nothing happens. I cannot get to the Setup with Del. The system don't red the foppys or any other disk. I tried everything; another BIOS-file, took out the battery, all add-in cards etc. Nothing works.
Does anybody got a solution?! :(
Grateful for any input!