A while ago my mobo stopped workin and started to gimme those 'code' beeps.
After lookin them up, it said: 4-3-4-1 Boot the Flash program.
There are a few problems:
1. I do not know the exact type of mobo, its a Packard Bell MediaRunner mobo, BIOSwiz once gave me this list:
Code: Select all
BIOS CAPABILITIES TEST REPORT
================================
Generated by: BIOS Wizard 2.10
Date: March 16, 2003
Time: 12:02
PnP Version : BIOS currently supports latest version 1.0
PCI Version : BIOS currently supports latest version 2.1
PCI IRQ Routing Table : BIOS currently supports this feature
Enhanced Disk Drive : BIOS currently supports this feature
DMI Version : Current version is 2.0. The minimum DMI version is 2.1
ACPI Version : ACPI is not found
APM Version : Bios currently supports lastest version 1.2
Booting From CD-ROM : BIOS currently supports this feature
Supports ESCD : BIOS currently supports this feature
Can be Updated (flashed) : BIOS currently supports this feature
Can be Shadowed : BIOS currently supports this feature
BIOS Chip in Socket : BIOS doesn't support this feature
Supports Selective Booting : BIOS currently supports this feature
Supports LS-120 Booting : The testing of this feature is not supported by the current DMI version
Supports ZIP Booting : The testing of this feature is not supported by the current DMI version
Supports Network Booting : The testing of this feature is not supported by the current DMI version
BIOS Manufacturer : PhoenixBIOS 4.0 Release 6.0 licensed to Intel
BIOS ID : 4A3NT0X0.11A.0003.P06.9709111759
BIOS Date : 09/11/97
BIOS OEM Signon :
BIOS ROM Size : 256K
Chipset : Intel Triton 430TX rev 1
Super I/O Chip : NSC 307 rev 15 found at port 2Eh
3. I havent found a proper BIOS file to flash into my ROM yet.
Could you guys help me out?