PCChips m729 Dead after bios update please help

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Roha
New visitors - please read the rules.
Posts: 4
Joined: Tue Apr 30, 2002 12:05 pm

It does absolutely nothing. Black screen, and the Harddisks stop running after a couple of seconds. And no boot from floppy. It worked for 3 days then went blank. please help, what can I do to save my bios?
Thanks, Roha
Top
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:
Contact Rainbow

I don't think that this is BIOS problem - BIOS usually don't corrupt itself (one exception I've seen were QDI LegendX 7 boards). Check connections and CPU.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Top
Roha
New visitors - please read the rules.
Posts: 4
Joined: Tue Apr 30, 2002 12:05 pm

Hi Rainbow,
Took it apart and put it back together but no result. No video, Hard disks stop running after a couple of seconds, CPU fan works, CD-Rom works no light on for the floppy. What can I do now?
Roha
Top
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:
Contact Denniss

Tried CLEAR CMOS and setting to 66MHz FSB ?
Top
Post Reply

Return to “My motherboard is dead”