40GB: Kaimei/Jamicon: 09/17/97-580VPX-ALi5113-2A5LDK1AC-00

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Spinneri
New visitors - please read the rules.
Posts: 4
Joined: Fri Jan 03, 2003 2:38 am

Hello!

I need bios update for Kaimei/Jamicon motherboard KM-V5-VPX. I cant find it anywhere but I hope someone can.

Here is some info about my motherboard:

Award BIOS found : Award Modular BIOS v4.51PG
Award ID-String : 09/17/97-580VPX-ALi5113-2A5LDK1AC-00
Board/BIOS-Version : KM-V5-VPX Rev. 2.6 OM - NOT FOR SALE
OEM : KAIMEI
URL : http://www.asiannet.com/taiwan/kaimei
Chipset : 580VPX-ALi5113 //VIA VPX


I need update because I bought 40gb harddisk and my bios is not recognizing it!!! :evil:
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

That URL didn't work, but this one at nix.ru has some Jamicon/Kamei BIOSes:
http://www.nix.ru/support/drivers.html? ... &vendor=18
That has "v5v1v26.bin"
09/17/97-580VPX-ALi5113-2A5LDK1AC-00
KM-V5-VPX Rev. 2.6
i.e. like yours without the "OM - not for resale"
I'll patch it and post it at the link in my signature, for you to test if you wish.
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Patched and posted to your email address. Please tell us if it's OK.
Spinneri
New visitors - please read the rules.
Posts: 4
Joined: Fri Jan 03, 2003 2:38 am

I just downloaded the bios file and I'm gona try it. I tell you if its working.

-=Spinneri=-
Spinneri
New visitors - please read the rules.
Posts: 4
Joined: Fri Jan 03, 2003 2:38 am

I tryed flash the bios but i got message:

Unknow Flash Type!

and

Checksum:988FH

-=Spinneir=-
crisp
New visitors - please read the rules.
Posts: 12
Joined: Tue Jan 07, 2003 12:13 pm

Try an older version of awardflash, or uniflash. Worked for me! :)
Spinneri
New visitors - please read the rules.
Posts: 4
Joined: Fri Jan 03, 2003 2:38 am

I cant find award flash program that can flash my bios. I have tested many of them from awd741 to newest and all says: Unknow Flash Type. :? Someone please send me a link to VERY old flash program that I can use. Can I use Uniflash to flash my bios? What version should I use?

-=Spinneri=-
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

If you want use UniFlash, use the latest version (currently v1.29) - newer version is always better than older (unlike other flashers :lol: )
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
haplo
New visitors - please read the rules.
Posts: 11
Joined: Sun Dec 23, 2007 6:52 pm

Hello! I have the same problem. Spinerri, could you tell me if you solved yours, and how?
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

Which part are you having problems with...the BIOS...or the actual Flash?
haplo
New visitors - please read the rules.
Posts: 11
Joined: Sun Dec 23, 2007 6:52 pm

Well, to tell you the truth, I don't even know the difference between the flash and the bios, but I tried to add three dard drives to the same motherboard and it doesn't accept them (one's 1gb and the other two are 6.3gb each) I removed one of the 6.3 gb hdd's and it works now (I don't remember the error message but i'll try again and post it later) but although the 1gb hdd is primary master and the other drive is secondary master it will only let me boot from the latter( i'll post that error message as well tomorrow, it was something like: 'invalid boot drive, please insert...etc')
p.s. it seems to recognize only 64mb of ram out of the 96 i have installed, meaning the two 32 mb memory modules on the first bank; do you by chance know how to make the other two modules work?
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

Please make sure that the HDD's are jumpered corectly for Master/Slave, etc... and that you plugged them in correctly.

As for the RAM, check to make sure that it is compatible with your chipset.

Thanks.
haplo
New visitors - please read the rules.
Posts: 11
Joined: Sun Dec 23, 2007 6:52 pm

Ok, so, about the hard disks: I tried again this morning with all three and it works :D . I did as you saidl, changed the jumpers from cable select to their appropriate positions, but it still won't boot from the smallest one(1 gb) the message I get is: Invalid system disk. Replace the disk, and then press any key. Anyway, that isn't a problem any more since i have access to 12 gb to boot from :P .
The issue with the memory still bothers me though. I don't know the 32mb modules' brand but i know that all of them work because if I leave one of the pairs on the board and remove the other one it will recognize them. Another thing to note is that if I switch the pairs' order meaning the 16mb modules on the first bank and the 32mb modules on the other then it won't recognize the 32mb modules instead of the 16mb ones. I also tried this on another motherboard (Jetway's j-656c) and I get the same results, even though the manual clearly states that it supports up to 128mb and one doesn't need to change any jumpers.
As a side note, I don't have the manual for the kaimei motherboard but I would be very interested in reading it if anyone has it.
KachiWachi
The New Guy
Posts: 1451
Joined: Fri Mar 29, 2002 10:32 pm
Location: Pennsylvania, USA

OK on the HDD issue. :D

What markings are on the RAM chips themselves?
haplo
New visitors - please read the rules.
Posts: 11
Joined: Sun Dec 23, 2007 6:52 pm

The 32 mb modules each have two stickers: one of them has written on it:
AXS Memory prod. 980202
ART-118018-A
Warranty void if removed

on the second i could barely make out: 32MB
on the chips themselves there's:
USA 9803
S4004SE1DJ
06
and on the board on which the chips lie:
HJ M1 94V-0

On the 16 mb modules I couldn't make out what was written on the chip but there is a sticker which says just about everything there is to know:
HP 1818-6430
16MB EDO 60(4Mx32)
REORDER DB648-63001

and on the circuit board:
ESA4UN3242-60JS-S
UK060697-07 assembled in uk P5320 2hqsh3sop

I hope this helps, and thank you for your patience :)
Post Reply