TOTEM TM-P2VAP Manual

Request help finding jumper settings or a motherboard manual.
Post Reply
linux_power
New visitors - please read the rules.
Posts: 3
Joined: Thu Mar 13, 2003 10:41 am

I am in need of a manual for the Totem TM-P2VAP. I have tried the following website http://www.elhvb.com/mboards/totem/manuals/ - but the manual once downloaded is corrupt.

If possible some someone email me it.

thanks in advance
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Tried using download manager such as GetRight?
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

No use, my FTP proggie scr*wed up badly. :evil: :evil: :evil:

Many of them are incomplete. Correcting the P2VAP as I type, might take some time. Server is slow today...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

smartftp 1.0.973 tells you it's done with uploading when it is not for some odd reason, you have to manually restart the upload session (up to 4 times !) to get it into its brains it is not done uploading yet...

Corrected and checked, they are OK now.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

You might want to try LeechFTP. It'll never say "upload ok" if it isn't 100% sure (and there).
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Another proggie. I would have 4 just for FTPing...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

When uploading through FTP gateway (such as WinProxy), the FTP client shows that the upload is complete but the data might not be completely uploaded. You need to wait for the directory to refresh (the FTP client will send LIST command but must wait until the server asks for it - the upload is really completed then).
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

files no longer listed in the global queue and you tell me it is still uploading? I didn't see any activity on my modem anymore. I've waited two minutes or so...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply